Publications by    
Page 1 of 2:  1  2  >> Next  (27 Items)

1.  Quantum Dot Intersubband Photodetectors
C. Jelen, M. Erdtmann, S. Kim, and M. Razeghi
SPIE Conference, San Jose, CA, -- January 22, 2001
Quantum dots are recognized as very promising candidates for the fabrication of intersubband photodetectors in the infrared spectral range. At present, material quality is making rapid progress and some devices have been demonstrated. Examples of mid-infrared quantum dot intersubband photodetectors are presented along with device design and data analysis. Nonetheless, the performance of these devices remains less than comparable quantum well intersubband photodetectors due to difficulties in controlling the quantum dot size and distribution during epitaxy. reprint
 
2.  Monolithic Integration of GaInAs/InP Quantum Well Infrared Photodetectors on Si Substrate
M. Erdtmann and M. Razeghi
SPIE Conference, San Jose, CA, -- January 22, 2001
Using low-pressure metalorganic chemical vapor deposition, we have grown GaInAs/InP QWIP structures on GaAs-coated Si substrate. First, the procedure to optimize the epitaxy of the InP buffer layer on Si substrate is given. Excellent crystallinity and a mirror-like surface morphology were obtained by using both a two-step growth process at the beginning of the InP buffer layer growth and several series of thermal cycle annealing throughout the InP buffer layer growth. Second, results of fabricated GaInAs/InP QWIPs on Si substrate are presented. At a temperature of 80 K, the peak response wavelength occurs at 7.4 μm. The responsivities of QWIPs on both Si and InP substrates with identical structures are equal up to biases of 1.5 V. At a bias of 3 V, the responsivity of the QWIPs on Si substrate is 1.0 A/W. reprint
 
3.  Long-Wavelength Quantum Well Infrared Photodetectors
M. Razeghi, M. Erdtmann, C. Jelen, J. Diaz, F. Guastavino and Y.S. Park
-- January 1, 2001
 
4.  Development of Quantum Well Infrared Photodetectors at the Center for Quantum Devices
M. Razeghi, M. Erdtmann, C. Jelen, J. Diaz, F. Guastavino, G.J. Brown, and Y.S. Park
-- January 1, 2001
 
5.  Quantum Well Infrared Photodetectors (3 - 20 μm) Focal Plane Arrays: Monolithic Integration with Si-based Readout-integrated Circuitry for Low Cost and High Performance
M. Razeghi, M. Erdtmann, C. Jelen, J. Diaz, F. Guastavino, G. J. Brown, and Y.S. Park
-- July 30, 2000
 
6.  High-responsivity GaInAs/InP Quantum Well Infrared Photodetectors Grown by Low-Pressure Metalorganic Chemical Vapor Deposition
M. Erdtmann, A. Matlis, C. Jelen, M. Razeghi, and G. Brown
SPIE Conference, San Jose, CA, -- January 26, 2000
We have studied the dependence of the well doping density in n-type GaInAs/InP quantum well IR photodetectors (QWIPs) grown by low-pressure metalorganic chemical vapor deposition. Three identical GaInAs/InP QWIP structures were grown with well sheet carrier densities of 1x1011 cm-2, 3x1011 cm-2, and 10x1011 cm-2; all three samples had very sharp spectral response at λ equals 9.0 μm. We find that there is a large sensitivity of responsivity, dark current, noise current, and detectivity with the well doping density. Measurements revealed that the lowest-doped samples had an extremely low responsivity relative to the doping concentration while the highest-doped sample had an excessively high dark current relative to doping. The middle-doped sample yielded the optimal results. This QWIP had a responsivity of 33.2 A/W and operated with a detectivity of 3.5x1010 cm·Hz½·W-1 at a bias of 0.75 V and temperature of 80 K. This responsivity is the highest value reported for any QWIP in the (lambda) equals 8-9 &mus;m range. Analysis is also presented explaining the dependence of the measured QWIP parameters to well doping density. reprint
 
7.  Growth and Optimization of GaInAsP/InP Material System for Quantum Well Infrared Photodetector Applications
M. Erdtmann, J. Jiang, A. Matlis, A. Tahraoui, C. Jelen, M. Razeghi, and G. Brown
SPIE Conference, San Jose, CA, -- January 26, 2000
Multi-quantum well structures of GaxIn1-xAsyP1-y were grown by metalorganic chemical vapor deposition for the fabrication of quantum well IR photodetectors. The thickness and composition of the wells was determined by high-resolution x-ray diffraction and photoluminescence experiments. The intersubband absorption spectrum of the Ga0.47In0.53As/InP, Ga0.38In0.62As0.80P0.20 (1.55 μm)/InP, and Ga0.27In0.73As0.57P0.43 (1.3 μm))/InP quantum wells are found to have cutoff wavelengths of 9.3 μm, 10.7 micrometers , and 14.2 μm respectively. These wavelengths are consistent with a conduction band offset to bandgap ratio of approximately 0.32. Facet coupled illumination responsivity and detectivity are reported for each composition. reprint
 
8.  Growth and characterization of InGaAs/InGaP quantum dots for mid-infrared photodetectors
S. Kim, M. Erdtmann, and M. Razeghi
-- July 1, 1999
 
9.  Characteristics of Self-Assembled InGaAs/InGaP Quantum Dot Mid-Infrared Photoconductive Detectors Grown by Low Pressure MOCVD
S. Kim, M. Erdtmann, and M. Razeghi
SPIE Conference, San Jose, CA, -- January 27, 1999
We report the first self-assembled InGaAs/InGaP quantum dot intersubband infrared photoconductive detectors (QDIPs) grown on semi-insulating GaAs substrate by low pressure metal organic chemical vapor deposition (MOCVD). The InGaAs quantum dots were constructed on an InGaP matrix as self assembling in Stranski-Krastanow growth mode in optimum growth conditions. The detector structure was prepared for single layer and multi-stacked quantum dots for active region. Normal incident photoconductive response was observed at a peak wavelength of 5.5 μm with a high responsivity of 130 mA/W, and a detectivity of 4.74 X 107 cm·Hz½/W at 77 K for multi-stack QDIP. Low temperature photoresponse of the single quantum dot photodetector was characterized. Peak response was obtained between 16 K and 60 K. The detailed dark current noise measurements were carried on single and multistack quantum dot infrared detectors. High photoconductive gain as 7.6 x 103 biased at 0.5 V results in increasing the intersubband carrier relaxation time as two order of magnitude compared quantum well infrared photodetectors. reprint
 
10.  Growth and characterization of InGaAs/InGaP quantum dots for mid-infrared photoconductive detector
S. Kim, H. Mohseni, M. Erdtmann, E. Michel, C. Jelen and M. Razeghi
Applied Physics Letters 73 (7)-- August 17, 1998
We report InGaAs quantum dot intersubband infrared photodetectors grown by low-pressure metalorganic chemical vapor deposition on semi-insulating GaAs substrates. The optimum growth conditions were studied to obtain uniform InGaAs quantum dots constructed in an InGaP matrix. Normal incidence photoconductivity was observed at a peak wavelength of 5.5 μm with a high responsivity of 130 mA/W and a detectivity of 4.74×107  cm· Hz½/W at 77 K. reprint
 
11.  Localized Epitaxy for Vertical Cavity Surface Emitting Laser Applications
M. Erdtmann, S. Kim and M. Razeghi
-- July 1, 1997
 
12.  The Long Wavelength Luminescence Observation from the Self-Organized InGaAs Quantum Dots Grown on (100) GaAs Substrate by Metalorganic Chemical Vapor Deposition
S. Kim, M. Erdtmann, and M. Razeghi
-- July 1, 1997
 
13.  Study on the effects of minority carrier leakage in InAsSb/InPAsSb double heterostructure
B. Lane, D. Wu, H.J. Yi, J. Diaz, A. Rybaltowski, S. Kim, M. Erdtmann, H. Jeon and M. Razeghi
Applied Physics Letters 70 (11)-- April 17, 1997
InAsxSb1−x/InP1−x−yAsxSby double heterostructures have been grown on InAs substrates by metal-organic chemical vapor deposition. The minority carrier leakage to the cladding layers was studied with photoluminescence measurements on the InAsSb/InPAsSb double heterostructures. A carrier leakage model is used to extract parameters related to the leakage current (diffusion-coefficient and length) from experimental results. Using the obtained parameters, the temperature dependence of the threshold current density of InAsSb/InPAsSb double heterostructure lasers is predicted and compared with experimental results. reprint
 
14.  Temperature insensitivity of the Al-free InGaAsP/GaAs lasers for λ = 808 and 908 nm
M. Razeghi, H. Yi, J. Diaz, S. Kim, and M. Erdtmann
SPIE Conference, San Jose, CA; Proceedings 3001-- February 12, 1997
n this work, we present our recent achievements for the reliability of the Al-free lasers at high temperatures and high powers. Laser operations up to 30,000 hours were achieved without any degradation in the lasers characteristics from 7 randomly selected InGaAsP/GaAs diodes for λ = 808 nm. The test were performed for lasers without mirror-coating for optical power of 0.5 to 1 W CW at 50 approximately 60 °C. To the best of our knowledge, this is the first direct demonstration of the extremely high reliability of Al-free diodes operations at high powers and temperatures for periods of time much longer than practical need (approximately 3 years). The characteristics during the tests are discussed in detail. reprint
 
15.  InAsSbP/InAsSb/InAs Laser Diodes λ = 3.2 μm) Grown by Low-Pressure Metalorganic Chemical Vapor Deposition
J. Diaz, G. Lukas, D. Wu, S. Kim, M. Erdtmann, E. Kaas, and M. Razeghi
Applied Physics Letters 70 (1)-- January 6, 1997
We report metal–organic chemical-vapor deposition-grown double heterostructure InAsSbP/InAsSb/InAs diode lasers emitting at 3.2 μm operating at temperatures up to 220 K with threshold current density of 40 A/cm² at 77 K and characteristic temperature up to 42 K. Output powers as high as 260 mW in pulse mode and 60 mW in continuous wave operation have been obtained from an uncoated 100 μm stripe-width broad-area laser at 77 K. Comparison with theory shows that there is no significant nonradiative recombination mechanism for these lasers at 77 K. reprint
 
16.  Photoluminescence study of InAsSb/InAsSbP heterostructures grown by low-pressure metalorganic chemical vapor deposition
S. Kim, M. Erdtmann, D. Wu, E. Kaas, H. Yi, J. Diaz, and M. Razeghi
Applied Physics Letters 69 (11)-- September 9, 1996
Photoluminescence has been measured for double‐ and separate‐confinement InAsSb/InAsSbP heterostructures grown by low‐pressure metalorganic vapor deposition. A measurement of the integrated luminescence intensity at the temperature range of 77–300 K shows that over a wide range of excitation level (1–5×10² W/cm²) the radiative transitions are the dominant. mechanism below T∼170 K. Auger recombination coefficient C=C0 exp(−Ea/kT) with C0≊5×10−27 cm6/s and Ea≊40 meV has been estimated. reprint
 
17.  Comparison of Gain and Threshold Current Density for InGaAsP/GaAs λ = 808 nm) Lasers with Different Quantum-Well Thickness
H.J. Yi, J. Diaz, I. Eliashevich, G. Lukas, S. Kim, D. Wu, M. Erdtmann, C. Jelen, S. Slivken, L.J. Wang, and M. Razeghi
Journal of Applied Physics 79 (11)-- July 1, 1996
We investigated the quantum‐size effects of quantum well (QW) on gain and threshold current density for InGaAsP/GaAs (λ=808 nm) laser diodes. In this work, a comparison is made of lasers with different QW thickness while keeping the optical confinement factors constant. We found that the threshold current density and differential efficiency were not affected by narrowing the QW thickness. The theoretical model taking into account the mixing of the valence bands and momentum relaxation for InGaAsP/GaAs lasers with spontaneous emission (optically pumped) measurement shows that the absence of difference between these structures can be attributed to the high relaxation rate. reprint
 
18.  High-Temperature Reliability of Aluminum-free 980nm and 808nm Laser Diodes
J. Diaz, H. Yi, C. Jelen, S. Kim, S. Slivken, I. Eliashevich, M. Erdtmann, D. Wu, G. Lukas, and M. Razeghi
-- January 1, 1996
 
19.  MOCVD Growth of Ga1-xInxAsyP1-y-GaAs Quantum Structures
M. Razeghi, J. Hoff, M. Erdtmann, S. Kim, D. Wu, E. Kaas, C. Jelen, S. Slivken, I. Eliashevich, J. Diaz, E. Bigan, G.J. Brown, S. Javadpour
-- January 1, 1996
 
20.  p-doped GaAs/Ga0.51In0.49P quantum well intersub-band photodetectors
J. Hoff, X. He, M. Erdtmann, E. Bigan, M. Razeghi, and G.J. Brown
Journal of Applied Physics 78 (3)-- August 1, 1995
Lattice‐matched p-doped GaAs–Ga0.51In0.49P quantum well intersub‐band photodetectors with three different well widths have been grown on GaAs substrates by metal‐organic chemical‐vapor deposition and fabricated into mesa structures. The photoresponse cutoff wavelength varies between 3.5 and 5.5 μm by decreasing the well width from 50 down to 25 Å. Dark current measurements as a function of temperature reveal activation energies for thermionic emission that closely correspond to measured cutoff wavelengths. Experimental results are in reasonable agreement with Kronig–Penney calculations. reprint
 
21.  Background Limited Performance in p-doped GaAs/Ga[0.71]In[0.29]As[0.39]P[0.61] Quantum Well Infrared Photodetectors
J. Hoff, S. Kim, M. Erdtmann, R. Williams, J. Piotrowski, E. Bigan, M. Razeghi and G. Brown
Applied Physics Letters 67 (1)-- July 3, 1995
Background limited infrared photodetection has been achieved up to 100 K at normal incidence with p-type GaAs/Ga0.71In0.29As0.39P0.61 quantum well intersubband photodetectors grown by low-pressure metalorganic chemical vapor deposition. Photoresponse covers the wavelength range from 2.5 μm up to 7 μm. The device shows photovoltaic response, the cutoff wavelength increases slightly with bias, and the responsivity increases nonlinearly with bias. These effects are attributed to an asymmetric quantum well profile. reprint
 
22.  Optimized structure for InGaAsP/GaAs 808nm high power lasers
H. Yi, J. Diaz, L.J. Wang, I. Eliashevich, S. Kim, R. Williams, M. Erdtmann, X. He, E. Kolev and M. Razeghi
Applied Physics Letters 66 (24)-- June 12, 1995
The optimized structure for the InGaAsP/GaAs quaternary material lasers (λ=0.808 μm) is investigated for the most efficient high‐power operation through an experiment and theoretical study. A comparative study is performed of threshold current density Jth and differential efficiency ηd dependence on cavity length (L) for two different laser structures with different active layer thickness (150 and 300 Å) as well as for laser structures with different multiple quantum well structures. A theoretical model with a more accurate formulation for minority leakage phenomenon provides explanation for the experimental results and sets general optimization rules for other lasers with similar restrictions on the band gap and refractive index difference between the active layer and the cladding layers. reprint
 
23.  High Power Aluminum-free InGaAsP/GaAs Pumping Diode Lasers
M. Razeghi, I. Eliashevich, J. Diaz, H.J. Yi, S. Kim, M. Erdtmann, D. Wu, and L.J. Wang
-- May 8, 1995
 
24.  Investigation of 0.8 μm InGaAsP-GaAs laser diodes with Multiple Quantum Wells
J. Diaz, H. Yi, S. Kim, M. Erdtmann, L.J. Wang, I. Eliashevich, E. Bigan and M. Razeghi
Optoelectronic Integrated Circuit Materials, Physics and Devices, SPIE Conference, San Jose, CA; Proceedings, Vol. 2397-- February 6, 1995
In this paper, we studied the effects of the active region structure (one, two and three quantum wells with same total thickness) for high-power InGaAsP-GaAs separate confinement heterostructure lasers emitting at 0.8 μm wavelength. Experimental results for the lasers grown by low pressure metalorganic chemical vapor deposition show excellent agreement with the theoretical model. Total output power of 47 W from an uncoated 1 cm-wide laser bar was achieved in quasi-continuous wave operation reprint
 
25.  Temperature dependence of threshold current density Jth and differential efficiency of High Power InGaAsP/GaAs ( λ = 0.8 μm) lasers
H. Yi, J. Diaz, I. Eliashevich, M. Stanton, M. Erdtmann, X. He, L. Wang, and M. Razeghi
Applied Physics Letters 66 (3)-- January 16, 1995
An experimental and theoretical study on temperature dependence of the threshold current density Jth and differential efficiency ηd for the InGaAsP/GaAs laser diodes emitting at λ=0.8 μm was performed. Threshold current density Jth increases and differential efficiency ηd decreases as temperature is increased mainly because of thermal broadening of the gain spectrum. However, the measured temperature dependence of Jth and ηd could not be explained when only this effect was considered. In this letter, the temperature dependence of momentum relaxation rate ℏ/τ of carriers was investigated by performing the photoluminescence study. At high temperature, increase of the momentum relaxation rate ℏ/τ leads to reduction of the gain and mobility and increase of the optical loss, causing higher Jth and lower ηd as experimentally observed. The resulting theoretical model provides a good explanation for the mechanism of the increase of Jth and decrease of ηd. reprint
 

Page 1 of 2:  1  2  >> Next  (27 Items)